Teledyne T200, Руководство по эксплуатации, Страница: 121 / 425

Teledyne API
– T200 NO/NO
2
/NO
X
Analyzer Operation Manual Setup Mode Menus
119
5.9.3.11. EXTERNAL ANALOG INPU
TS (XIN1…XIN8) OPTION CONFIGURATION
To configure the analyzer‟s optional external analog inputs, define for each channel
:

gain (number of units represented by 1 volt)

offset (volts)

engineering units to be represented in volts (each press of the touchscreen button
scrolls the list of alphanumeric characters from A-Z and 0-9)

whether to display the channel in the Test functions
These parameters can also be captured in the internal Data Acquisition System (DAS);
refer to Appendix A for Analog-In DAS parameters.
To adjust settings for the Analog Inputs option parameters press:
DIAG AIO XIN1 GAIN:1.00V/V
SET> EDIT EXIT
DIAG ANALOG I / O CONFIGURATION
PREV NEXT ENTR EXIT
DIAG AIO AOUTS CALIBRATED: NO
< SET SET> CAL EXIT
DIAG AIO XIN1 GAIN:1.00V/V
+ 0 0 1 .0 0 ENTR EXIT
Press to change
Gain value
DIAG AIO XIN1:1.00,0.00,V,OFF
< SET SET> EDIT EXIT
Press
SET>
to scroll to the first
channel. Continue pressing
SET>
to view each of 8 channels.
Pressing
ENTR
records the new setting
and returns to the previous menu.
Pressing
EXIT
ignores the new setting and
returns to the previous menu.
Press
EDIT
at any channel
to to change Gain, Offset,
Units and whether to display
the channel in the Test
functions (OFF/ON).
DIAG AIO XIN1 OFFSET:0.00V
< SET SET> EDIT EXIT
DIAG AIO XIN1 UNITS:V
< SET SET> EDIT EXIT
DIAG AIO XIN1 DISPLAY:OFF
< SET EDIT EXIT
06858E DCN7057