Suzuki GW250, Руководство по обслуживанию

Страница: 426 / 478

10-16 SERVICING INFORMATION
Route the generator lead wire
between the crankcase and
starter motor and pass it over
the crankcase.
Do not pinch
the lead wires
Ground lead wire
20˚ – 40˚
10 N·m
(1.0 kgf-m, 7.0 lbf-ft)
Generator lead wire
Gear position switch
lead wire
Starter
motor
VIEW B
Speed sensor
A
B B
C
130 N·m
(13.0 kgf-m, 94.0 lbf-ft)
6.5 N·m
(0.65 kgf-m, 4.5 lbf-ft)
Gear position switch
13 N·m
(1.3 kgf-m, 9.5 lbf-ft)
1.5 N·m
(0.15 kgf-m, 1.0 lbf-ft)
Do not pinch
the lead wire
at this area
Do not contact
the clamp to the
crankcase.
Generator cover
Lead wire
CKP sensor
11 N·m
(1.1 kgf-m, 8.0 lbf-ft)
5.5 N·m
(0.55 kgf-m, 4.0 lbf-ft)
CKP sensor
Grommet
VIEW A VIEW C
Do not slacken.
Gear position switch
lead wire
Pass the speed sensor lead wire
and side-stand switch lead wire
under the clutch release camshaft
retainer.
Pass the starter motor
lead wire under the frame.
Clutch release camshaft retainer
2.7 N·m
(0.27 kgf-m, 2.0 lbf-ft)
Starter
motor
lead wire
4.5 N.m
0.45 kgf-m
3.25 lbf-ft
( )
Do not strongly pull the generator lead wire Do not strongly pull the generator lead wire
to the coupler side.
to the coupler side.
Do not strongly pull the generator lead wire
to the coupler side.