Suzuki GW250, Руководство по обслуживанию

Страница: 132 / 478

3-84 ENGINE
• Apply engine oil to the clutch drive plates and driven plates.
• Insert the clutch drive plates and driven plates one by one into
the clutch sleeve hub in the prescribed order.
• When install the clutch pressure plate
B
, fit the convex part
A
of the clutch pressure plate onto the concave part
B
of the
clutch sleeve hub.
• Install the clutch springs and clutch spring bolts.
• Hold the clutch pressure plate
B
with the special tool.

09930-40113: Flywheel rotor holoder
• Tighten the clutch spring bolts securely in diagonal.
• Loosen the clutch release adjuster nut
C
and turn in the
clutch release screw
D
to feel resistance.
• From this position, turn the release screw
D
counterclockwise
1 rotation, and tighten the lock-nut
C
while holding the
release screw
D
.

Clutch release adjuster lock-nut:
5.5 N·m (0.55 kgf-m, 4.0 lbf-ft)
• Pour engine oil (30 ml – 40 ml) from the hole of the clutch
pressure plate into the clutch sleeve hub.
CLUTCH COVER
• Apply bond lightly to the mating surfaces at the parting line
between the upper and lower crankcases as shown.

99000-31140: SUZUKI BOND No.1207B or equivalent