Suzuki GW250, Руководство по обслуживанию, Страница: 462 / 478

10-52 SERVICING INFORMATION
CRANKSHAFT
Unit: mm (in)
CRANK BALANCER
Unit: mm (in)
OIL PUMP
ITEM STANDARD LIMIT
Conrod small end I.D. 15.006 – 15.014
(0.5908 – 0.5911)
15.040
(0.5921)
Conrod big end side clearance 0.10 – 0.20
(0.004 – 0.008)
0.30
(0.012)
Conrod big end width 19.95 – 20.00
(0.7854 – 0.7874)
—
Crank pin width 20.10 – 20.15
(0.7913 – 0.7933)
—
Conrod big end oil clearance 0.032 – 0.056
(0.0013 – 0.0022)
0.080
(0.0031)
Crank pin O.D. 30.976 – 31.000
(1.2195 – 1.2205)
—
Crankshaft journal oil clearance 0.016 – 0.040
(0.0006 – 0.0016)
0.080
(0.0031)
Crankshaft journal O.D. 29.976 – 30.000
(1.1802 – 1.1811)
—
Crankshaft thrust bearing thickness
Right side
2.450 – 2.625
(0.0965 – 0.1033)
—
Left side
2.450 – 2.475
(0.0965 – 0.0974)
Crankshaft thrust clearance 0.050 – 0.105
(0.0020 – 0.0041)
—
Crankshaft runout
—
0.05
(0.002)
ITEM STANDARD LIMIT
Crank balancer journal oil clear-
ance 0.020 – 0.044
(0.0008 – 0.0017)
0.080
(0.0031)
Crank balancer journal O.D. 27.976 – 28.000
(1.0660 – 1.1024)
—
Balancer spring free length
—
10.3
(0.41)
ITEM STANDARD LIMIT
Oil pressure (at 60 °C, 140 °F) 200 – 500 kPa
(2 – 5 kgf/cm², 28 – 71 psi)
at 3 000 r/min
—