Suzuki GW250, Руководство по обслуживанию, Страница: 281 / 478

7-18 COOLING AND LUBRICATION SYSTEM
• Install the rubber seal
3
into the impeller
4
.
• After wiping off the oily or greasy matter from the mechanical
seal ring
5
, install it into the impeller.
NOTE:
The paint marked side
B
of mechanical seal ring faces the rub-
ber seal.
• Install the washer
6
and seal washer
7
onto the impeller
securing bolt.
NOTE:
The metal side
C
of seal washer and the curved side
D
of
washer face the impeller securing bolt head.
• Install the impeller
8
.
• Tighten the impeller securing bolt
9
to the specified torque.

Impeller securing bolt: 8 N·m (0.8 kgf-m, 6.0 lbf-ft)
• Install a new O-ring
0
and apply engine coolant to it.
• Fit the water pump cover and tighten the water pump cover
screws
A
to the specified torque.

Water pump cover screw: 5.5 N·m (0.55 kgf-m, 4.0 lbf-ft)
• Install a new gasket washer and tighten the water pump air
bleeder bolt
B
.