PARTS LIST
©
2000 American Honda Motor Co., Inc - All Rights Reserved.
08L42-MCA-1004-91
1 of 3
Accessory
Application
Publications No.
Issue Date
Honda Dealer: Please give a copy of this instruction to your customer.
INSTALLATION
INSTRUCTIONS
TOOLS REQUIRED
Hex wrench (5 mm)
Electric drill motor
Drill bit (3 mm, 6 mm, and 10.5 mm)
Awl
Torque wrench
TORQUE CHART
Be sure to tighten all bolts to their specified torque.
INSTALLATION
1.
Open the trunk lid and remove the inner lid.
CHROME TRUNK RACK
P/N 08L42-MCA-100
GL1800
December 2000
(1)
Item
N·m
kgf·m
Ibf·ft
6mm Socket bolt
12
1.2
9
CONTROL BOX
INNER LID
TRUNK LID
LOCK STAY
SCREW
MOTORCYCLE’S
HARNESS CONNECTOR
SCREW (13)
(3)
(2)
(4)
2.
Position the template under the trunk lid by using the
two ejector pin marks as the guide, mark the center
of the two dots on the template with an awl.
TRUNK LID
EJECTOR PIN MARKS
MARKS
LEFT SIDE TEMPLATE
3.
Repeat on the right side.
No.
Description
Q’ty
(1)
Trunk rack
1
(2)
Washer
4
(3)
Rubber washer
4
(4)
6 mm Socket bolt
4
Customer Information
: The information in this Acces-
sory Installation Instruction is intended for use only by
skilled technicians who have the proper tools, equipment
and training to correctly and safely add equipment to your
motorcycle. These procedures should not be attempted
by “do-it-yourselfers.”
