Subaru 2006 Legacy, Руководство пользователя

Страница: 3122 / 4302

ME(H6DO)-4
General Description
MECHANICAL
Piston pin
Outer diameter mm (in) Standard 21.994 — 22.000 (0.8659 — 0.8661)
Standard clearance between piston
and piston pin
mm (in) Standard 0.004 — 0.008 (0.0002 — 0.0003)
Piston ring
Ring closed gap mm (in)
Top ring Standard 0.20 — 0.35 (0.0079 — 0.0138)
Second ring Standard 0.35 — 0.50 (0.0138 — 0.0197)
Oil ring Standard 0.20 — 0.60 (0.0079 — 0.0236)
Ring groove gap mm (in)
Top ring Standard 0.040 — 0.080 (0.0016 — 0.0031)
Second ring Standard 0.030 — 0.070 (0.0012 — 0.0028)
Oil ring Standard 0.045 — 0.125 (0.0018 — 0.0049)
Connecting
rod
Side clearance of large end mm (in) Standard 0.070 — 0.330 (0.0028 — 0.0130)
Bearing of
large end
Oil clearance mm (in) Standard 0.016 — 0.043 (0.0006 — 0.0017)
Bearing size
(Thickness at center)
mm (in)
Standard 1.490 — 1.506 (0.0587 — 0.0593)
0.03 (0.0012) US 1.509 — 1.513 (0.0594 — 0.0596)
0.05 (0.0020) US 1.519 — 1.523 (0.0598 — 0.0600)
0.25 (0.0098) US 1.619 — 1.623 (0.0637 — 0.0639)
Bushing of
small end Clearance between piston pin and
bushing
mm (in) Standard 0 — 0.022 (0 — 0.0009)
Crankshaft
Crank pin and crank journal
Out-of-roundness mm (in) 0.005 (0.0002)
Cylindricality mm (in) 0.006 (0.0002)
Crank pin outer diameter mm (in)
Standard 51.984 — 52.000 (2.0466 — 2.0472)
0.03 (0.0012) US 51.954 — 51.970 (2.0454 — 2.0461)
0.05 (0.0020) US 51.934 — 51.950 (2.0446 — 2.0453)
0.25 (0.0098) US 51.734 — 51.750 (2.0368 — 2.0374)
Crank journal outer
diameter
mm (in)
#1, #3,
#5, #7
Standard 63.992 — 64.008 (2.5194 — 2.5200)
0.03 (0.0012) US 63.962 — 63.978 (2.5182 — 2.5188)
0.05 (0.0020) US 63.942 — 63.958 (2.5174 — 2.5180)
0.25 (0.0098) US 63.742 — 63.758 (2.5095 — 2.5102)
#2, #4,
#6
Standard 63.992 — 64.008 (2.5194 — 2.5200)
0.03 (0.0012) US 63.962 — 63.978 (2.5182 — 2.5188)
0.05 (0.0020) US 63.942 — 63.958 (2.5174 — 2.5180)
0.25 (0.0098) US 63.742 — 63.758 (2.5095 — 2.5102)
Thrust clearance mm (in) Standard 0.030 — 0.115 (0.0012 — 0.0045)
Oil clearance mm (in) Standard 0.010 — 0.030 (0.0004 — 0.0012)
Main
bearing
Bearing size
(Thickness at cen-
ter)
mm (in)
#1, #3,
#5, #7
Standard 1.992 — 2.005 (0.0784 — 0.0789)
0.03 (0.0012) US 2.011 — 2.014 (0.0792 — 0.0793)
0.05 (0.0020) US 2.021 — 2.024 (0.0796 — 0.0797)
0.25 (0.0098) US 2.121 — 2.124 (0.0835 — 0.0836)
#2, #4,
#6
Standard 1.996 — 2.009 (0.0786 — 0.0791)
0.03 (0.0012) US 2.015 — 2.018 (0.0793 — 0.0794)
0.05 (0.0020) US 2.025 — 2.028 (0.0797 — 0.0798)
0.25 (0.0098) US 2.125 — 2.128 (0.0837 — 0.0838)
asieps_tobira.book 4 ページ ２００９年１０月２６日 月曜日 午前９時１６分