Subaru 2006 Legacy, Руководство пользователя

Страница: 1825 / 4302

EN(H4DOTC)(diag)-19
Engine Control Module (ECM) I/O Signal
ENGINE (DIAGNOSTICS)
A/C middle pressure switch B136 30
ON: 0
OFF: 10 — 13
ON: 0
OFF: 12 — 14
—
Clutch switch B134 1
When clutch pedal is
depressed: 0
When brake pedal is
released: 10 — 13
When clutch pedal is
depressed: 0
When brake pedal is
released: 12 — 14
—
Brake switch 1 B136 9
When brake pedal is
depressed: 0
When brake pedal is
released: 10 — 13
When brake pedal is
depressed: 0
When brake pedal is
released: 12 — 14
—
Brake switch 2 B136 8
When brake pedal is
depressed: 10 — 13
When brake pedal is
released: 0
When brake pedal is
depressed: 12 — 14
When brake pedal is
released: 0
—
Cruise control command
switch
B136 11
When not operating:
3.5 — 4.5
When operating RES/
ACC: 2.5 — 3.5
When operating SET/
COAST: 0.5 — 1.5
When operating cancel:
0 — 0.5
When not operating:
3.5 — 4.5
When operating RES/
ACC: 2.5 — 3.5
When operating SET/
COAST: 0.5 — 1.5
When operating cancel:
0 — 0.5
—
Cruise control main switch B136 7
ON: 0
OFF: 5
ON: 0
OFF: 5
—
Exhaust temperature sen-
sor
B136 24 — — —
Fuel tank pressure sensor B136 21 2.3 — 2.7 2.3 — 2.7 —
Pressure control solenoid
valve
B134 12
ON: 1 or less
OFF: 10 — 13
ON: 1 or less
OFF: 12 — 14
—
Drain valve B134 13
ON: 1 or less
OFF: 10 — 13
ON: 1 or less
OFF: 12 — 14
—
Fuel temperature sensor B136 12 2.5 — 3.8 2.5 — 3.8
Ambient temperature:
25°C(77°F)
Immobilizer
Signal 1 B137 19 — — —
Signal 2 B137 27 — — —
CAN communication line
(+)
B137 18 — — —
CAN communication (–) B137 26 — — —
AT/MT identification B134 34 0 0 —
Blow-by leak diagnosis sig-
nal
B137 24 0 0
At the time of open cir-
cuit (fault): 5
Tumble generator valve
position sensor signal (RH)
B136 27
Fully closed: 3.8 — 4.9
Fully open: 0.2 — 0.9
Fully closed: 3.8 — 4.9
Fully open: 0.2 — 0.9
—
Tumble generator valve
position sensor signal (LH)
B136 26
Fully closed: 3.8 — 4.9
Fully open: 0.2 — 0.9
Fully closed: 3.8 — 4.9
Fully open: 0.2 — 0.9
—
Tumble generator valve RH
(closed)
B134 8 0 or 10 — 13 0 or 12 — 14 —
Tumble generator valve LH
(closed)
B134 10 0 or 10 — 13 0 or 12 — 14 —
Tumble generator valve RH
(open)
B134 9 0 or 10 — 13 0 or 12 — 14 —
Tumble generator valve LH
(open)
B134 11 0 or 10 — 13 0 or 12 — 14 —
Description
Connec-
tor No.
Termi-
nal No.
Signal (V)
Note
Ignition SW ON
(engine OFF)
Engine ON
(idling)
asieps_tobira.book 19 ページ ２００９年１０月２６日 月曜日 午前９時１６分