Subaru 2006 Legacy, Руководство пользователя

Страница: 1513 / 4302

CO(H4DOTC)-15
Water Pump
COOLING
4. Water Pump
A: REMOVAL
1) Remove the collector cover.
2) Remove the radiator. <Ref. to CO(H4DOTC)-19,
REMOVAL, Radiator.>
3) Remove the V-belts. <Ref. to ME(H4DOTC)-36,
REMOVAL, V-belt.>
4) Remove the timing belt. <Ref. to ME(H4DOTC)-
42, REMOVAL, Timing Belt.>
5) Remove the automatic belt tension adjuster (A).
6) Remove the belt idler (B).
7) Remove the belt idler No. 2 (C).
8) Remove the camshaft position sensor. <Ref. to
FU(H4DOTC)-23, REMOVAL, Camshaft Position
Sensor.>
9) Remove the cam sprocket (LH) using ST. <Ref.
to ME(H4DOTC)-50, REMOVAL, Cam Sprocket.>
10) Remove the tensioner bracket.
11) Remove the belt cover (LH) No. 2.
12) Disconnect the hose from water pump.
13) Remove the water pump.
B: INSTALLATION
1) Install the water pump onto cylinder block (LH).
NOTE:
• Always use new gaskets.
• When installing the water pump, tighten the bolts
in two stages in alphabetical sequence as shown in
figure.
Tightening torque:
First:
12 N·m (1.2 kgf-m, 8.9 ft-lb)
Second:
12 N·m (1.2 kgf-m, 8.9 ft-lb)
2) Install the hose to water pump.
3) Install the belt cover No. 2 (LH).
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
CO-00023
( A )
( B )
( C )
CO-00025
CO-00024
CO-00021
ME-02463
(F)
(E)
(D)
(C)
(B)
(A)
CO-00024
asieps_tobira.book 15 ページ ２００９年１０月２６日 月曜日 午前９時１６分