Subaru 2006 Legacy, Руководство пользователя

Страница: 3864 / 4302

DI-45
Rear Differential (VA-type)
DIFFERENTIALS
13) Remove the rear differential front member.
14) Secure the rear differential using band.
15) Remove the self-lock nuts which hold the rear
differential to rear crossmember.
16) Remove the rear differential stud bolt from rear
crossmember bushing.
NOTE:
When removing the stud bolt, carefully adjust the
angle and location of transmission jack and jack
stand, if necessary
17) Lower the transmission jack stand after remov-
ing the rear differential stud bolt from the rear
crossmember. Rear drive shaft should not come
into contact with the lateral link bolt.
18) Pull out the axle shaft from rear differential.
NOTE:
If it is difficult to remove the axle shaft from rear dif-
ferential, remove it using tire lever.
19) Lower the transmission jack.
20) Secure the rear drive shaft to lateral link using
wire.
21) Remove the rear differential member plate from
rear differential.
B: INSTALLATION
1) Insert the rear differential member plate into rear
differential.
2) Set the rear differential to transmission jack.
NOTE:
Secure the rear differential to transmission jack us-
ing band.
DI-00400
DI-00392
DI-00276
(A) Rear differential member plate
(A) Rear differential member plate
DI-00277
DI-00359
(A)
DI-00359
(A)
asieps_tobira.book 45 ページ ２００９年１０月２６日 月曜日 午前９時１６分