Subaru 2006 Legacy, Руководство пользователя

Страница: 3154 / 4302

ME(H6DO)-56
Camshaft
MECHANICAL
(6) Measure the widest point of the plastigauge
on each journal. If oil clearance exceeds the
standard, replace the camshaft. If necessary,
replace the camshaft caps and cylinder head as
a set.
Standard:
0.037 — 0.072 mm (0.0015 — 0.0028 in)
(7) Completely remove the plastigauge.
5) Check the cam face condition; remove the minor
faults by grinding with oil stone. Measure the cam
height H. If it exceeds the standard or offset wear
occurs, replace it.
Cam height H:
Standard
Intake
HIGH 42.09 — 42.19 mm (1.6571 — 1.6610
in)
LOW1 38.14 — 38.24 mm (1.5016 — 1.5055
in)
LOW2 34.94 — 35.04 mm (1.3756 — 1.3795
in)
Exhaust
41.65 — 41.75 mm (1.6398 — 1.6437 in)
Cam base circle diameter A:
Intake
HIGH 32.0 mm (1.2598 in)
LOW1 31.84 mm (1.2535 in)
LOW2 31.84 mm (1.2535 in)
Exhaust
32.0 mm (1.2598 in)
6) Measure the side clearance of the camshaft with
a dial gauge. If the side clearance exceeds the
standard or there is offset wear, replace the caps
and cylinder head as a set. If necessary replace the
camshaft.
Standard
Intake
0.075 — 0.135 mm (0.0030 — 0.0053 in)
Exhaust
0.030 — 0.090 mm (0.0012 — 0.0035 in)
ME-00119
ME-00120
H
A
asieps_tobira.book 56 ページ ２００９年１０月２６日 月曜日 午前９時１６分