Subaru 2006 Legacy, Руководство пользователя

Страница: 3229 / 4302

4AT- 8 2
Converter Case
AUTOMATIC TRANSMISSION
4) Install the right and left side retainers. <Ref. to
4AT-99, ADJUSTMENT, Front Differential Assem-
bly.>
5) Install new seal pipe to converter case.
6) Install the rubber seal to converter case.
7) Apply proper amount of liquid gasket to the en-
tire matching surface of converter case.
Liquid gasket:
THREE BOND 1215 (Part No. 004403007)
8) Install the converter case without damaging
bushing and oil seal.
Tightening torque:
41 N·m (4.2 kgf-m, 30.4 ft-lb)
9) Insert the inhibitor switch and transmission con-
nector to the stay.
10) Install the air breather hose. <Ref. to 4AT-66,
INSTALLATION, Air Breather Hose.>
11) Install the oil cooler pipe. <Ref. to 4AT-64, IN-
STALLATION, ATF Cooler Pipe and Hose.>
12) Install the oil charge pipe with O-ring. <Ref. to
4AT-67, INSTALLATION, Oil Charge Pipe.>
13) Insert the input shaft while rotating it lightly by
hand, and then check the amount of protrusion.
Normal protrusion A:
50 — 55 mm (1.97 — 2.17 in)
14) Install the torque converter assembly. <Ref. to
4AT-68, INSTALLATION, Torque Converter As-
sembly.>
15) Install the transmission assembly to the vehi-
cle. <Ref. to 4AT-38, INSTALLATION, Automatic
Transmission Assembly.>
C: INSPECTION
Measure the backlash, and then adjust it to be with-
in standard values. <Ref. to 4AT-91, ADJUST-
MENT, Drive Pinion Shaft Assembly.>
(A) Seal pipe
(A) Rubber seal
(A) THREE BOND 1215
(B) Rubber seal
AT-00176
AT-00178
(A)
(B)
(A)
AT-00179
AT-00175
AT-00291
A
asieps_tobira.book 82 ページ ２００９年１０月２６日 月曜日 午前９時１６分