Spectra Logic Spectra nTier700, Руководство по установке

Страница: 84 / 120

Chapter 5 – Maintenance
84
3. Release the latch on the drive sled by pushing the locking tab to the left, then lift
upward on the latch until it is fully extended (see Figure 5-5), extracting the drive
from the connector inside the blade.
4.
Using both hands, grasp the sides of the drive sled and slide it straight up and out
of the drive slot.
5. Place the drive on an anti-static mat so that the screws securing it to the sled are
accessible.
Install the New Drive on the Sled
1.
Using a #2 Phillips screwdriver, unscrew the four screws securing the
malfunctioning drive to the drive sled (Figure 5-6). Remove the drive from the drive
sled and set the drive aside.
2.
Remove the new drive from its anti-static bag.
Figure 5-5
Extend the latch fully.
Figure 5-6 Remove the screws securing the drive to the drive sled.
Latch
Front of sled
Screws
Under side of drive sled
Latch
Drive
connectors