Spectra Logic Spectra nTier700, Руководство по установке

Страница: 103 / 120

Environmental Specifications
103
220 Volt-AC Power Cord for International Use
Note:
To use the nTier700 VTL outside of North America, the power cord
must meet the specifications for that country.
The criteria for an international 220-volt AC power cord are as follows:
ƒ
It must have an attachment plug of the proper type, rating, and safety approval for
the intended country.
ƒ
It must have a molded IEC 60320 C13 female connector to connect to the
nTier700 VTL power supply.
ƒ
It must be a flexible, HAR (harmonized) type H05VV-F, three-conductor cord with
minimum conductor size of 0.03 square inches (1.0 square millimeter).
Environmental Specifications
This section describes environmental specifications for the Spectra nTier700 VTL. If the
nTier700 VTL is installed in a rack, do not place the rack on a carpeted floor or
anywhere else that poses risk for static discharge that could damage the nTier700 VTL
or its drives.
Caution:
The rack should always be installed on hard flooring, such as
tile. It should never be installed on carpeted flooring.
The Spectra nTier700 VTL is equipped with internal fans as well as temperature
sensors that operate the fans as much or as little as is necessary in your data center
environment. These features keep the nTier700 VTL’s internal temperature within
specifications as long as the data center environment is within specifications.
Caution:
When the nTier700 VTL is moved from a cold environment to a
warm environment, it should not be used for at least 24 hours.
This adjustment period prevents condensation damage.