Spectra Logic Spectra nTier700, Руководство по установке

Страница: 85 / 120

Replacing a Data Drive
85
3. Place the drive into the sled so that the drive connectors are positioned at the back
of the drive sled and the mounting screw holes are toward the bottom of the drive
sled (Figure 5-6).
4. Align mounting holes in the drive with the screw holes in the drive sled.
5. Using a #2 Phillips screwdriver, install the four mounting screws to secure the new
drive to the drive sled, as shown in Figure 5-6.
Install the New Drive in the Blade
The nTier700 VTL automatically detects the drive when it is installed. The drive
mapping for the RAID volumes in the nTier700 VTL is dynamic. The system determines
the current drive positions during the first system boot and automatically updates the
drive locations to preserve that volume’s preconfigured RAID 6 volume.
To install the drive in the blade:
1. Put on the provided anti-static wristband and attach it to an unpainted metallic
surface.
2. If necessary, release the latch on the drive sled by sliding the locking tab to the left
and rotating the latch toward the top of the sled (see Figure 5-7 and Figure 5-8).
Note:
You only need to move the latch enough to release it.
Figure 5-7 Release the drive sled latch.
Tab