Spectra Logic Spectra nTier700, Руководство по установке

Страница: 60 / 120

Chapter 4 – Using the nTier700 VTL BlueScale Web Interface
60
Menus
The Menu panel (shown in Figure 4-2) appears along the left edge of each page. Menu
buttons in this panel let you navigate through the available menus to select options.
Selecting a menu button expands the menu to display the available options.
The following table provides an overview of the options available under each menu.
The page for the previously selected option remains displayed until you select another
option, either from the same menu or another one.
BlueScale Status Icons
Icons indicate the status of a component and the highest severity level for any system
messages, as described in the following table. Click the icon to view the related system
messages (see
Viewing Messages on page 61).
Menu Available Options
Messages
The
Messages
button displays a list of all the current messages (see Viewing
Messages
on page 61).
ƒ
Status
—A status icon on the Messages button indicates the highest
severity level for the unread messages. See BlueScale Status Icons for a
description of the status icons.
ƒ
Unread messages
—The number of unread messages (if any) displays on
the
Message
button.
General The General menu (shown in Figure 4-2) accesses the most frequently used
the Overview and Energy Audit screens.
ƒ
Overview
—Provides the current status for all of the major components in
the nTier700 VTL. Selecting one of the tabs on the graphic highlights the
selected component and displays current status information (see
Monitoring the Status of Components
on page 63). You can also power
down drives through the
Overview
menu and lock/unlock operator panel
buttons.
ƒ
Energy Audit —Provides graphical displays of the nTier700 VTL power
consumption (see Monitoring Energy Consumption on page 66).
Configuration
The
Configuration
menu accesses controls for configuring the IP address and
other settings for each Ethernet port, NIC, or HBA installed in the
nTier700 VTL (see
Displaying Network Information
on page 67).
About
Displays the BlueScale firmware version and the nTier700 VTL serial number.
Icon Meaning
Component OK. The component is functioning correctly.
Information. An informational message about a system component is available. Check
messages to determine the component.