background image

1-23

BRC-300/300P

BRU-300/300P

1-8. Circuit Protection Parts (Fuse)

Each unit equips a fuse as a circuit protection part.
The fuse melts if overcurrent flows or the unit overheats

due to a unit problem.
When replacing the fuse, be sure to use the following

designated parts.
Correct the cause resulting in the melting of the fuse before

replacement.

w

Use Designated Parts

The fuse/IC link is an important part for ensuring safety.
Replacement with parts other than those designated will

result in fire hazards and electric hazards. Therefore be
sure to use only designated parts.

BRC-300/300P

Board

Ref. No.

Part No./Description

SY-314

F1501

!

 1-533-998-11

F1502

On-chip fuse 1.0 A, 125V

F1503

!

 1-533-483-11

F1504

On-chip fuse 1.6 A, 125V

BRU-300/300P

Board

Ref. No.

Part No./Description

MC-66

F4001

!

 1-533-483-11

On-chip fuse 1.6 A, 125V

F4002

!

 1-533-998-11

F4003

On-chip fuse 1.0 A, 125V

RM-BR300

Board

Ref. No.

Part No./Description

MD-131

F5001

!

 1-533-998-11

On-chip fuse 1.0 A, 125V

Содержание BRC-300





































































































































































































































































































Отзывы: