501
Commands Explanation
Global mode
[no] router IPv6 ospf <tag>
The command initializes ospfv3 routing
process and enter ospfv3 mode to
configure ospfv3 routing process. The
[no] router IPv6 ospf <tag>
command
stops relative process. (required)
OSPFv3 Protocol Configure Mode
router-id <router_id>
no router-id
Configure router for ospfv3 process. The
no router-id
command returns ID to
0.0.0.0 (required)
[
no
]
passive-interface<ifname>
Configure an interface receiving without
sending. The [
no
]
passive-interface<ifname>
command
cancels configuration.
Interface Configuration Mode
[no] IPv6 router ospf
{
area <area-id>
[instance-id <instance-id> | tag <tag>
[instance-id <instance-id>]] | tag
<tag> area <area-id> [instance-id
<instance-id>]}
Implement ospfv3 routing on the interface.
The
[no] IPv6 router ospf
{
area
<area-id>
[
instance-id <instance-id> |
tag <tag> [instance-id <instance-id>]] |
tag <tag> area <area-id>
[
instance-id
<instance-id>
]} command cancels
configuration.
2. Configure OSPFv3 parameters
（
1
）
Configure OSPFv3 package sending mechanism parameters
1
）
Set the OSPF interface to receive only
2
）
Configure the cost for sending packages from the interface
Commands Explanation
Interface Configuration Mode
IPv6 ospf cost
<cost>
[instance-id <id>]
no IPv6 ospf cost
[instance-id
<id>]
Appoint interface to implement required cost
of OSPFv3 protocol. The
no IPv6 ospf cost
[instance-id <id>]
restores the default setting
3
）
Configure OSPFv3 package sending timer parameter (timer of broadcast interface
sending HELLO package to poll, timer of neighboring layer3 switch invalid timeout, timer
of LSA transmission delay and timer of LSA retransmission.
