137
3.7 Command for device management
3.7.1 debug devsm
Command:debug devsm { send | receive | state }
no debug devsm
{
send | receive | state
}
Function:
Displays the device management packet traffic and cards status conditions.
The “
no debug devsm
{
send | receive | state
}” command disables DEBUG display.
Parameters: send
displays outgoing device management packets.
receive
displays incoming device management packets.
state
displays card status change information
Default:
Debugging information is disabled by default.
Command mode:
Admin Mode
3.7.2 force runcfg-sync
Command: force runcfg-sync
Function
Enforce the synchronizing running-config from active master to standby master
Command Mode:
Admin mode
Usage Guide:
When the running-config varies from the startup-configure, this command
synchronizes running-configure from active master to standby master, so that the new
running-config will be used as restoration when performing the switchover.
3.7.3 force switchover
Command: force switchover
Function:
Enforce the active master switched to standby master
Command Mode:
Admin Mode
Usage Guide:
When standby master exits, if this command is executed on active master
will trigger the switchover, and the former standby master will become the new active
master.
3.7.4 reset slot
Command: reset slot <slotno>
Function:
Resets specified card.
