502
Commands Explanation
Interface Configuration Mode
IPv6 ospf hello-interval <time>
[instance-id <id>]
no IPv6 ospf hello-interval
[instance-id <id>]
Sets interval for sending HELLO packages;
the “
no IPv6 ospf hello-interval [instance-id
<id>]
” command restores the default setting.
IPv6 ospf dead-interval <time>
[instance-id <id>]
no IPv6 ospf dead-interval
[instance-id <id>]
Sets the interval before regarding a neighbor
layer3 switch invalid; the “
no IPv6 ospf
dead-interval [instance-id <id>]
” command
restores the default setting.
IPv6 ospf transit-delay <time>
[instance-id <id>]
no IPv6 ospf transit-delay
[instance-id <id>]
Sets the delay time before sending link-state
broadcast; the “
no IPv6 ospf transit-delay
[instance-id <id>]
” command restores the
default setting.
IPv6 ospf retransmit <time>
[instance-id <id>]
no IPv6 ospf retransmit
[instance-id <id>]
.Sets the interval for retransmission of
link-state advertisement among neighbor
layer3 switches; the “
no IPv6 ospf
retransmit [instance-id <id>]
” command
restores the default setting.
（
2
）
Configure OSPFv3 route introduction parameters
Configure OSPFv3 route introduction parameters
Commands Explanation
OSPF Protocol Configuration Mode
[no]redistribute {kernel |connected|
static| rip| isis| bgp} [metric<value>]
[metric-type {1|2}][route-map<word>]
Introduces other protocol discovery
routing and static routing regarded as
external routing message. The
[no]redistribute {kernel |connected|
static| rip| isis| bgp} [metric<value>]
[metric-type {1|2}][route-map<word>]
command cancels imported external
routing message.
（
3
）
Configure Other Parameters of OSPFv3 Protocol
1
）
Configure OSPFv3 STUB Area & Default Routing Cost
2
）
Configure OSPFv3 Virtual Link
