29
port-channel, and accordingly the three interface configuration modes.
Interface Type Entry
Prompt
Operates
Exit
VLAN
Interface
Type
interface
vlan <Vlan-id>
command under
Global Mode.
Switch(Config-If-
Vlanx)#
Configure
switch IPs, etc
Use the
exit
command to
return to
Global Mode.
Ethernet Port
Type
interface
ethernet
<interface-list>
command under
Global Mode.
Switch(Config-
ethernetxx)#
Configure
supported
duplex mode,
speed, etc.
of Ethernet
Port.
Use the
exit
command to
return to
Global Mode.
port-channel Type
interface
port-channel
<port-channel-nu
mber>
command
under Global
Mode.
Switch(Config-if-
port-channelx)#
Configure
port-channel
related
settings such
as duplex
mode, speed,
etc.
Use the
exit
command to
return to
Global Mode.
1.2.2.5 VLAN Mode
Using the
vlan <vlan-id>
command under Global Mode can enter the corresponding
VLAN Mode. Under VLAN Mode the user can configure all member ports of the
corresponding VLAN. Run the
exit
command to exit the VLAN Mode to Global Mode.
1.2.2.6 DHCP Address Pool Mode
Type the
ip dhcp pool <name>
command under Global Mode will enter the DHCP
Address Pool Mode prompt “
Switch(Config-<name>-dhcp)#
”. DHCP address pool
properties can be configured under DHCP Address Pool Mode. Run the
exit
command to
exit the DHCP Address Pool Mode to Global Mode.
1.2.2.7 Route Mode
Routing
Protocol
Entry Prompt
Operates
Exit
RIP
Routing
Type
router
rip
Switch(Config-Router-Rip)#
Configure
RIP protocol
Use the
“
exit”
