152
2. Configure the properties for the network management ports
（
1
）
Enable/Disable ports
（
2
）
Configure port speed
（
3
）
Configure port duplex mode
（
4
）
Enable/Disable port loopback function
（
5
）
Configuring port IP Address
1. Enter the network management port configuration mode
2. Configure the properties for the network management port
Command Explanation
Network Management Port
Configuration
shutdown
no shutdown
Enables/Disables network management
port
speed {auto| force10| force100| }
Sets network management port speed
duplex {auto| full| half}
Sets network management port duplex
mode
loopback
no loopback
Enables/Disables loopback test function
for network management port
ip address <ip-address> <mask>
no ip address [<ip-address>
<mask>]
Configures or cancels the IP address for
network management port.
4.2.3.2 Command for Network Management Port Configuration
4.2.3.2.1 duplex
Command: duplex {auto| full| half }
Function:
Sets network management port duplex mode
Parameters:
auto
for auto-negotiation full-duplex mode;
full
for forced full-duplex mode;
half
for forced half-duplex mode.
Command mode:
Network management port configuration Mode
Default:
The default duplex mode is set to auto-negotiation.
Usage Guide:
According to IEEE 802.3, the auto-negotiation for port speed and duplex
Command Explanation
Global Mode
interface ethernet <num>
Enters the network management port
configuration mode
