80
message. And for v3 version, this command is used for receiving the network manage
station IP address and the Trap user name and safety level; the “no” form of this
command cancels this IP address.
Command Mode:
Global Mode
Parameter: <ipv4-addr>|<ipv6-addr>
is the IP address of the NMS managing station
which receives Trap message.
v1|v2c|v3 is the
version number when sending the trap
NoauthNopriv|AuthNopriv|AuthPriv
is the safety level v3 trap is applied, which may be
non encrypted and non authentication, non encrypted and authentication, encrypted and
authentication.
<
user-string>
is the community character string applied when sending the Trap
message at v1/v2, and will be the user name at v3
Usage Guide:
The Community character string configured in this command is the default
community string of the RMON event group. If the RMON event group has no community
character string configured, the community character string configured in this command
will be applied when sending the Trap of RMON, and if the community character string is
configured, its configuration will be applied when sending the RMON trap.
Example:
Configure an IP address to receive Trap
Switch(config)#snmp-server host 1.1.1.5 v1 usertrap
Delete a Trap receiving IP address
Switch(config)#no snmp-server host 1.1.1.5 v1 usertrap
Configure a Trap receiving IPv6 address
Switch(config)#snmp-server host 2001:1:2:3::1 v1 usertrap
Delete a Trap receiving IPv6 address
Switch(config)#no snmp-server host 2001:1:2:3::1 v1 usertrap
2.4.3.8 debug snmp mib
Command: debug snmp mib
no debug snmp mib
Function:
Enable the SNMP mib debugging; the "
no debug snmp mib
” command
disables the debugging
Command Mode
: Admin Mode
Usage Guide:
When user encounters problems in applying SNMP, the SNMP debugging
is available to locate the problem causes.
Example:
Switch#debug snmp mib
2.4.3.9 debug snmp keneral
