739
Default:
When a port is made static and dynamic mrouter port at the same time, it’s the
static mrouter properties is preferred. Deleting the static mrouter port can only be done
with the “no” form of this command.
Example:
Switch(config)#ipv6 mld snooping vlan 2 mrouter-port interface ethernet
18.4.3.8 ipv6 mld snooping vlan mrpt
Command: ipv6 mld snooping vlan <vlan-id> mart <value>
no ipv6 mld snooping vlan <vlan-id> mart
Function:
Configure the keep-alive time of the mrouter port.
Parameter: vlan-id
: vlan id, the valid range is <1-4094>
value
:mrouter port keep-alive time with a valid range of <1-65535> secs.
Command Mode:
Global Mode
Default:
255s
Usage Guide:
This configuration is applicable on dynamic mrouter port, but not on static
mrouter port. To use this command, MLD snooping must be enabled on the vlan.
Example:
Switch(config)#ipv6 mld snooping vlan 2 mrpt 100
18.4.3.9 ipv6 mld snooping vlan query-interval
Command: ipv6 mld snooping vlan <vlan-id> query-interval <value>
no ipv6 mld snooping vlan <vlan-id> query-interval
Function:
Configure the query interval
Parameter: vlan-id
: vlan id, the valid range is <1-4094>
value
:query interval, valid range: <1-65535>secs.
Command Mode:
Global Mode
Default:
125s
Usage Guide:
It is recommended to use default value and if layer 3 MLD is in operation,
please make this configuration in accordance with the MLD configuration as possible.
Example:
Switch(config)#ipv6 mld snooping vlan 2 query-interval 130
18.4.3.10 ipv6 mld snooping vlan query-mrsp
Command: ipv6 mld snooping vlan <vlan-id> query-mrsp <value>
no ipv6 mld snooping vlan <vlan-id> query-mrsp
Function:
Configure the maximum query response period. The “no” form of this
command restores the default value.
Parameter: vlan-id
: vlan id, the valid range is<1-4094>
value
:query interval, the valid range is <1-25> secs .
Command Mode:
Global Mode
