418
Command: ip rip send version { 1 | 2 |
1-compatible | 1 2}
no ip rip send version
Function:
Set the version information of the RIP packets the interface receives. The
default version is 2; the “
no ip rip send version
” command restores the value set by
using the version command.
Parameter:
1 and 2 respectively stands for RIP version 1 and RIP version 2, 1 2 stands
for the RIP versions 1, 2.
Default:
Version 2
Command Mode:
Interface Mode
Example:
Switch# config terminal
Switch(config)# interface vlan 1
Switch(Config-if-Vlan1)# ip rip send version 1
14.4.3.18 ip rip split-horizon
Command: ip rip split-horizon [poisoned]
no ip rip split-horizon
Function:
Enable split horizon. The “
no ip rip split-horizon
” disables the split horizon.
Parameter: [poisoned]
means configure the split horizon with poison reverse.
Default:
Split Horizon with poison reverse by default
Command Mode:
Interface Mode
Usage Guide:
The split horizon is for preventing the Routing Loops, namely preventing
the layer 3 switches from broadcasting the routes which is learnt from the same interface
on which the route to be broadcasted
Example:
Switch# config terminal
Switch(config)# interface vlan 1
Switch(Config-if-Vlan1)# ip rip split-horizon poisoned
14.4.3.19 key
Command: key <keyid>
no key <keyid>
Function:
This command is for managing and adding keys in the key chain. The “
no key
<keyid>
“ command deletes one key.
Parameter: <keyid>
is key ID, ranging between 0-2147483647.
Command Mode:
Keychain mode
Usage Guide:
The command permits entering the keychain-key mode and set the
passwords corresponding to the keys.
Example:
Switch# config terminal
Switch(config)# key chain mychain