408
distribute-list {< access-list-number
|access-list-name
>|prefix<prefix-list-name>}{in|out}
[<ifname>]
no distribute-list {<
access-list-number |access-list-name
>|prefix<prefix-list-name>}{in|out}
[<ifname>]
Configure and apply the access table and
prefix table to filter the routes. the
no
distribute-list {<
access-list-number
|access-list-name
>|prefix<prefix-list-name>}{in|out}
[<ifname>]
command means do not use the
access table and prefix table
5
）
configure the split horizon
Command Explanation
Interface configuration mode
ip rip split-horizon [poisoned]
no ip rip split-horizon
Configure that take the split horizon when the
port sends data packets; poisoned for poison
reverse the
no ip rip split-horizon
command
cancels the split horizon
（
3
）
Configure other RIP protocol parameters
1
）
Configure RIP routing priority
2
）
Configure the RIP route capacity limit in route table
3
）
Configure timer for RIP update, timeout and hold-down
4
）
Configure RIP UDP receiving buffer size
Command Explanation
Router configuration mode
distance <number> [<A.B.C.D/M> ]
[<access-list-name|access-list-numb
er >]
no distance [<A.B.C.D/M> ]
Specify the route administratively distance of
RIP protocol; the
no distance
[<A.B.C.D/M> ]
command restore the default
value 120
maximum-prefix
<maximum-prefix>
[
<threshold>
]
no
maximum-prefix
<maximum-prefix
>
no
maximum-prefix
Configure the maximum of RIP route; the
no
maximum-prefix
<maximum-prefix >
no
maximum-prefix
command cancels the
limit
timers basic <update> <invalid>
<garbage>
no timers basic
Adjust the update, timeout and garbage
collection time, the
no timers basic
command restore the default configuration
