667
Command Explanation
Global Configuration Mode
[no] ip multicast policy <IPADDRESS/M>
<IPADDRESS/M> cos <priority>
Configure multicast strategy, specify
priority for sources and groups in
specific range, and the range is
<0-7>
17.5.3 Command For ECSCM
17.5.3.1 access-list (Multicast Source Control)
Command:access-list<5000-5099>{deny|permit}ip{{<source><source-wildcard>}|{h
ost-source<source-host-ip>}|any-source}{{<destination><destination-wild
card>}|{host-destination<destination-host-ip>}|any-destination}
Noaccess-list<5000-5099>{deny|permit}ip{{<source><source-wildcard>}|{h
ost-source<source-host-ip>}|any-source}{{<destination><destination-wild
card>}|{host-destination<destination-host-ip>}|any-destination}
Function:
Configure source control multicast access-list; the “
no access-list
<5000-5099>{deny|permit}ip{{<source><source-wildcard>}|{host-source<source-ho
st-ip>}|any-source}{{<destination><destination-wildcard>}|{host-destination
<destination-host-ip>}|any-destination}
” command deletes the access-list.
Parameter: <5000-5099>
: source control access-list number.
{deny|permit}
: deny or permit.
<source>
: multicast source address..
<source-wildcard>
: multicast source address wildcard character.
<source-host-ip>
: multicast source host address.
<destination>
: multicast destination address.
<destination-wildcard>
: multicast destination address wildcard
character.
<destination-host-ip>
: multicast destination host address.
Default:
None
Command Mode:
Global Mode
Usage Guide:
ACL of Multicast destination control list item is controlled by specifical ACL
number from 5000 to 5099, the command applies to configure this ACL. ACL of Multicast
destination control onlt needs to configure source IP address and destination IP address
controlled (group IP address), the configuration mode is basically the same to other ACLs,
and use wildcard characterto configure address range, and also specify a host address
or all address. Remarkable, “all address” is 224.0.0.0/4 according to group IP address,
