141
both are operating normally, only the Ethernet port in the Active Master can be used as
the network management port. When Active-Standby occurs, the network management
port will change accordingly.
4.2 Port Configuration
4.2.1 Network Port Configuration
4.2.1.1 Network Port Configuration Task List
1. Enter the network port configuration mode
2. Configure the properties for the network ports
（
1
）
Configure combo mode for combo ports
（
2
）
Enable/Disable ports
（
3
）
Configure port names
（
4
）
Configure port cable types
（
5
）
Configure port speed and duplex mode
（
6
）
Configure bandwidth control
（
7
）
Configure traffic control
（
8
）
Enable/Disable port loopback function
（
9
）
Configure broadcast storm control function for the switch
1. Enter the Ethernet port configuration mode
2. Configure the properties for the Ethernet ports
Command
Explanation
Interface Mode
combo-forced-mode { copper-forced
| copper-preferred-auto | sfp-forced |
sfp-preferred-auto }
no combo-forced-mode
Sets the combo port mode (combo ports
only); the “
no combo-forced-mode
”
command restores the default combo
mode for combo ports, i.e., fiber ports first.
Command
Explanation
Interface Mode
interface ethernet <interface-list>
Enters the network port configuration
mode.
