manualshive.com logo in svg

Sierra Wireless DART 200, Руководство пользователя


Поделиться
Скачать
background image

DART 200 CDPD Modem User’s Guide

PN1197-00 Revision 1.0 

iii

Important Notice

The Data Access Radio Transceiver (DART) can only be exported from the US, or re-exported to another country with the
issuance of an export license from the US Government. Contact Sierra Wireless for more information.

Because of the nature of wireless communications, transmission and reception of data can never be guaranteed. Data can be
delayed, corrupted, or be totally lost. Although significant delays or losses of data are rare when wireless devices such as DART
are used in a normal manner with a well-constructed network. DART should not be used in situations where failure to transmit or
receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death,
or loss of property. Sierra Wireless, Inc., accepts no responsibility for damages of any kind resulting from delays or errors in data
transmitted or received using DART, or for failure of DART to transmit or receive such data.

Contact Information

Sierra Wireless, Inc.
260 - 13151 Vanier Place, Richmond, BC, Canada V2V 2J2
Tel. 604.231.1100 or 313.528.5880
Fax. 604.231.1109
Email: [email protected]
Web site: www.sierrawireless.com

Part Number: 1197-00, Revision 1.0

© 1997 Sierra Wireless, Inc. All rights reserved.

Printed in Canada.
First Printing: January, 1998.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, without
the prior permission of the publisher.

AT is a trademark of Hayes Microcomputer Products, Inc.

Hayes is a registered trademark of Hayes Microcomputer Products, Inc.

All other trademarks are owned by their respective companies.

The information in this guide is subject to change without notice and does not represent a commitment on the part of Sierra
Wireless, Inc. Sierra Wireless, Inc. shall not be liable for incidental or consequential damages resulting from the furnishing,
performance, or use of this manual

Safety and Hazards

Do not operate the Sierra Wireless modem in areas where blasting is in progress, where explosive atmospheres may be present,
near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio
interference. In such areas, the Sierra Wireless modem

 MUST BE TURNED OFF

. The Sierra Wireless modem can transmit

signals which could interfere with this equipment.

Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra
Wireless modem 

MUST BE TURNED OFF

. The reason for this is that when operating in the CDPD or cellular circuit switched

mode, the Sierra Wireless modem can transmit signals which could interfere with various onboard equipment systems.

The driver or operator of any vehicle should not operate the Sierra Wireless modem while in control of a vehicle. Doing so will
detract from the driver or operator’s control and operation of that vehicle. In some states and provinces, operating such
communications devices while in control of a vehicle is an

 

offence.

Содержание DART 200















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DART 200

B&B Electronics Zlinx Xtreme ZXT9-RM User Manual preview
Zlinx Xtreme ZXT9-RM
Бренд: B&B Electronics Страницы: 163
u-blox LISA-C200 User Manual preview
LISA-C200
Бренд: u-blox Страницы: 79
Multitech CommPlete MT3334HD8 User Manual preview
CommPlete MT3334HD8
Бренд: Multitech Страницы: 100
NAL RESEARCH CORPORATION QUICKSILVER QS-095 User Manual preview
QUICKSILVER QS-095
Бренд: NAL RESEARCH CORPORATION Страницы: 74
Kathrein K-LAN 2.4 Manual preview
K-LAN 2.4
Бренд: Kathrein Страницы: 8
StarHub MF626 Quick User Manual preview
MF626
Бренд: StarHub Страницы: 10
iiNet MOBIIBROADBAND 4G Quick Install Manual preview
MOBIIBROADBAND 4G
Бренд: iiNet Страницы: 2
iiNet ADSL2+ Modem User Manual preview
ADSL2+ Modem
Бренд: iiNet Страницы: 55
Zoom Telephonics 56K Quick Start Manual preview
56K
Бренд: Zoom Telephonics Страницы: 67
Zoom 4300 User Manual preview
4300
Бренд: Zoom Страницы: 26
Zoom 2985C User Manual preview
2985C
Бренд: Zoom Страницы: 32
Ebyte E104-BT5040U User Manual preview
E104-BT5040U
Бренд: Ebyte Страницы: 15
Ebyte 230N37 User Manual preview
230N37
Бренд: Ebyte Страницы: 20
Ebyte 433NW30-ETH User Manual preview
433NW30-ETH
Бренд: Ebyte Страницы: 34
Ebyte 4440-ETH User Manual preview
4440-ETH
Бренд: Ebyte Страницы: 35
Ebyte 2AI User Manual preview
2AI
Бренд: Ebyte Страницы: 35
QEI UG-1032 Manual preview
UG-1032
Бренд: QEI Страницы: 12
DXO Telecom XV1000 User Manual preview
XV1000
Бренд: DXO Telecom Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды