103BCommunication
10.2 PROFINET
S7-1200 Programmable controller
System Manual, 11/2011, A5E02486680-05
437
You can assign tag memory locations to the inputs and outputs, as shown in the following
figure:
Configuring the General parameters
You specify the parameters in the Properties configuration dialog of the TRCV_C instruction.
This dialog appears near the bottom of the page whenever you have selected any part of the
TRCV_C instruction.
10.2.6
Configuring a CPU and PROFINET IO device
Adding a PROFINET IO device
Use the hardware catalog to add PROFINET IO devices.
Note
To add a PROFINET IO device, you can use STEP 7 Professional or Basic, V11 or greater.
For example, expand the following containers in the hardware catalog to add an ET200S IO
device: Distributed I/O, ET200S, Interface modules, and PROFINET. You can then select the
interface module from the list of ET200S devices (sorted by part number) and add the
ET200S IO device.
Table 10- 32 Adding an ET200S IO device to the device configuration
Insert the IO device
Result
