SATO TG308, Руководство по обслуживанию

Страница: 92 / 252

Section 4: Operation and Configuration
Page 4-52
TG3 Series Service Manual
4.12 TEST PRINT MODE
(
Cont’d)
1)
First piece
-- Printer model name, firmware version, print head life expectancy, various serial numbers,
sensor information, and DSW setting will be printed.
Item name to be printed Description
Model Printer model name.
Firm Ver Firmware version.
Font Ver Font version.
Firm Date Created date of firmware.
Print format is indicated by the last 2 digits of the year, month and
day.
Life or Life Counter Printed life expectancy in “m” scale.
Head1 (Head Counter 1)
Head2 (Head Counter 2)
Head3 (Head Counter 3) Print head life expectancy in “m” scale.
Cutter or Cutter Counter The number of paper being cut.
Head Check or
Head-Check [All] Checks print head condition and prints its result.
*Check result will not be indicated in reverse colors.
S/N Serial number of printer.
C S/N Serial number of CONT board (Main PCB).
PCB Rev. CONT board (Main PCB) version.
I/F Rev. Interface version.
Reflective Sensor
Low [Lo<1.0] x.x(V)
High [0.8<Hi-Lo] x.x(V)
Slice Level Auto
This information will be printed when reflective sensor is enabled.
*Setting value will not be indicated in reverse colors.
Transmissive Sensor
Low [0.2<Lo<1.0] x.x(V)
High [0.8<Hi-Lo] x.x(V)
Slice Level Auto
This information will be printed when transmissive sensor is
enabled.
*Setting value will not be indicated in reverse colors.
DSW1 DSW setting on CONT board (Main PCB).
DSW2 When RS-232C interface board is connected, the DSW information
on the interface board will be printed.
JP9 JP9 on CONT board (Main PCB).
“0” must be selected for this setting.