Section 4: Operation and Configuration
Page 4-14
TG3 Series Service Manual
4.7 INTERFACE MODE
In this mode, you can set various parameters governing the use of interface cards.
4.7.1 Overview of Interface Mode Configurations
1.
During Offline mode, press
FUNCTION
button to display the operational icon menu. Press
arrow
buttons
to select INTERFACE MODE.
2.
When INTERFACE MODE is displayed, press the
FEED
button to enter Interface mode for adjustment.
Note:
PASSWORD may prompt on the display if SET PASSWORD is set to ON in the Service mode. Please
refer to
Section 4.15 Service Mode
for details on how to enter password.
3.
Keypad CONNECT is first displayed. Press the
FEED
button repeatedly will switch to the next setting
options as shown above. To return to the previous setting option, press
ONLINE
button.
4.
When the desired setting option is displayed, press
arrow
buttons to select the item or to set the value and
then press
FEED
button to save the setting.
FEED button
FEED button
FEED
button
ONLINE
button
FEED
button
ONLINE
button
FEED
button
ONLINE
button
Setting contents differ by I/F card
installed.
To the setting of LAN2/Wireless LAN2
To the setting of IEEE1284
To the setting of USB
To the setting of RS-232C
ONLINE
button
Select YES +
FEED button
Select
NO +
FEED
button
ONLINE
button
FUNCTION
button
FUNCTION button
FUNCTION
button
FUNCTION
button
FUNCTION
button
FUNCTION
button
Displayed only when entry
of PASSWORD is enabled
Displayed only when
communication protocol is
set to STATUS4
Return to INTERFACE MODE menu
FEED button
* Press , , or button to select
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
Содержание TG308
