SATO TG308, Руководство по обслуживанию

Страница: 77 / 252

Section 4: Operation and Configuration
TG3 Series Service Manual
Page 4-37
4.12 TEST PRINT MODE
(
Cont’d)
TEST PRINT MODE
Menu Description
Setting ink roller motion during test print.
NO
: No ink roller action will be taken.
YES
: Ink roller action will be taken during test print.
The initial value is NO.
Adjusting the print and cut positions.
Press
/ arrow
buttons to change the setting value and press
/ arrow
buttons to toggle between PITCH POSITION and OFFSET POSITION setting.
Both setting range are ±0.15” (3.75 mm) and are adjustable by 0.01” (0.25
mm).
The initial value is +0.00” (0.00 mm).
Press
FEED
button to start test printing.
Test print is in progress
Press
FEED
button while printing will pause the test print operation.Press
FEED
again to continue.