SATO TG308, Руководство по обслуживанию

Страница: 173 / 252

Section 6: Checks and Adjustment Procedures
TG3 Series Service Manual
Page 6-35
6.15 CALENDAR SETTING
Note:
The calendar setting is available only when the calendar IC is installed in the printer.
1.
Enter to ADVANCED MODE, and press
FEED
button repeatedly until SET
CALENDAR is displayed. Refer to
Section 4.9 Advanced Mode
for more
details.
2.
Press /
arrow
buttons to select the YES and press
FEED
button to
proceed.
3.
Press
/ arrow
buttons to change the setting value and press /
arrow
buttons to move the cursor to next digit. Press
FEED
button to enter the
setting.
4.
Enter the date and time twice. CALENDAR 02 will display right after setting
the CALENDAR 01, this is for confirmation of the value entered. When the
entered value of both screens match, it goes to the next screen after saving
the value. If not, the printer beeps and goes back to the first entry display.
The number of entries is indicated on the right side of display.