SATO TG308, Руководство по обслуживанию

Страница: 81 / 252

Section 4: Operation and Configuration
TG3 Series Service Manual
Page 4-41
4.12 TEST PRINT MODE
(
Cont’d)
3)
Third piece
-- RFID information will be printed. Note that this test print is available only when [RFID
MODULE] is enabled.
Item name to be printed Description
MODEL NAME or
MODEL Printer model name.
ROM NO. or
ROM Firmware version.
DATE Created date of firmware.
Date format is indicated by the last 2 digits of the year, month and
day.
RFID Life Counter The number of succeeded/ failed RFID tag writes and the total tag
count. Note that the count after reset will be shown in this item.
RFID Success or Success The number of write successes to RFID tag.
RFID Failure or Failure The number of write failures to RFID tag.
RFID Total or Total The total tag writing counts.
(Sum of write successes and failures).