SATO TG308, Руководство по обслуживанию

Страница: 250 / 252

Section 8: Appendix
Page 8-20
TG3 Series Service Manual
8.15 INFORMATION ON MEDIA WHEN USING CUTTER
8.15.1 Cutting of Labels
The correct cutting position is at the label gap. Cutting onto
the label must be avoided because the label adhesive that
accumulates on the blade will affect cutter sharpness.
8.15.2 Cutting Media with Perforation
As for media with perforation,
cutting on or in front of the
perforated lines is prohibited
. Cutting in those locations
could cause the media to jam and the printer to malfunction.
The perforated line +0.04” (+1 mm) is the cut prohibited
zone.
8.15.3 Cutter replacement
Over time, the cutter loses its cutting ability and begins to show
signs of wear.
Replace the cutter unit when the blade becomes blunt and cut
edges are rough. (Please contact an authorized SATO
Representative for replacement.)
Backing paper
Cut Position
Label
Cut Position
Label
Cut prohibited zone
(1mm, 0.04”)
Perforated line
123 —
3 2 1
6 5 4
—456