SATO TG308, Руководство по обслуживанию

Страница: 124 / 252

Section 5: Troubleshooting
Page 5-4
TG3 Series Service Manual
17
BCC CHECK ERROR ONLINE:
Off
ERROR:
Blinks
3 short
Beeps
1) BCC that is added to send
data (for 1 item) differs.
To clear error: Press
ONLINE button or cancel
job.
1) Check host data and
communication settings
18 ITEM NO ERROR ONLINE:
Off
ERROR:
Blinks
3 short
Beeps
1) Sequence number of print
data (for 1 item) is not
incrementing by one.
• Sequence number is not
consecutive.
To clear error: Press
ONLINE button or cancel
job.
1) Check host data and
communication settings.
19 STACKER/REWINDER
FULL
ONLINE:
Off
ERROR:
Blinks
3 short
Beeps
1) Stacker and/or rewinder
are full.
To clear error: Release
limitation
1) Remove paper from stacker and/
or rewinder.
21 KANJI ROM ERROR ONLINE:
Off
ERROR:
Blinks
3 short
Beeps
1) Reading improper Kanji
data through Kanji ROM.
To clear error: Head open
and then close
1) Download Kanji data.
2) Board replacement.
22 CALENDAR ERROR ONLINE:
Off
ERROR:
On
1 Long
Beep
1) Reading improper date
and time data through
calendar IC
To clear error: Power Off
1) Check the installation of
calendar IC.
2) Replace the calendar IC.
3) Replace the PCB board.
23
RFID TAG ERROR ONLINE:
Off
ERROR:
On
3 short
Beeps
1) Write failure of RFID tag
To clear error: Write to
another RFID tag or cancel
job.
1) Write to another RFID tag.
RFID TAG ERROR ONLINE:
Off
ERROR:
On
3 short
Beeps
1) Write failure of RFID tag
To clear error: Press
ONLINE button or cancel
job.
1) Write to another RFID tag.
RFID PROTECT
ERROR
ONLINE:
Off
ERROR:
On
3 short
Beeps
1) Write failure of RFID tag
To clear error: Write to
another RFID tag or cancel
job.
1) Write to another RFID tag.
24
NONLOCK ERROR ONLINE:
Off
ERROR:
Blinks
3 short
Beeps
1) Ribbon core is not locked
properly.
2) Ribbon core sensor
failure.
To clear error: Head open
and then close
1) Lock ribbon core properly.
2) Adjust or replace ribbon core
sensor.
No. ERROR DISPLAY LED BUZZER ERROR CONDITION CORRECTIVE ACTION