Samsung SCX-5835 Series, Руководство пользователя

Страница: 97 / 147

Machine status and advanced feature
_ 4
FAX SETUP
This machine offers you various options for setting up the fax system. You
can change the default settings for your preferences and needs, as follows:
1.
Press
Machine Setup
on the control panel.
2.
Press
Admin Setting
. When the login message pops up, enter
password and press
OK
.
3.
Press the
Setup
tab >
Fax Setup
.
The fax options are different from country to country depending on the
International Communications Regulatory. If some of the fax options
explained in the instructions have been grayed out, it means that the
grayed-out function is not supported in your communication
environment.
OPTION DESCRIPTION
Machine ID & Fax
No.
Enter the machine ID and fax number which will
be printed at the top of each page. This option is
usually pre-set for user.
Receive Start
Code
This feature works best when you are using an
extension telephone connected to the EXT socket
at the back of your machine. You can receive a fax
from with whom you are talking on the extension
telephone, without going to the fax machine. (See
"Receiving faxes manually using an extension
telephone" on page 5.)
Error Correction
Mode
It helps with poor line quality and ensures any
faxes you send are properly transmitted to any
other ECM-equipped fax machines. Sending a fax
using ECM may take more time.
Fax Initial Setup
You can set
Receive Mode
for
Telephone
,
Fax
or
Answering Machine/Fax
, and
Dial Mode
at
either
Tone
or
Pulse
.
When you select
Answering Machine/Fax
, you
can receive a fax while the line is being used by
the answering machine. (See "Changing the
receive modes" on page 4.)
Contact your local telephone company for
Dial
Mode
setting information.
Ring to Answer
You can specify the number of times the machine
rings before answering an incoming call.
Receive Header
Use this option to automatically print the page
number, date, and time of fax reception at the
bottom of each page.
Secure Receive
You may need to prevent your received faxes from
being accessed by unauthorized people. This
feature restricts printing of received faxes when
the machine is unattended. If you select this
option to
On
, all incoming faxes go into memory.
A four-digit
Passcode
is used when you want to
print out received faxes in memory. (See
"Receiving in secure receiving mode" on page 5.)
Received Fax
Printing
Sets the printing method for the received fax.
•
Auto Reduction:
When receiving a fax
containing pages longer than the paper loaded
in the tray, the machine can reduce the size of
the original to fit the size of the paper. If this
feature is set to
Off
, the machine cannot
reduce the original to fit onto one page. The
original will be divided and printed in actual
size on two or more pages. For example, this
option is set to
Off
and
Discard Size
to 10
mm, but the received data is longer then the
currently set paper in the tray, the machine
omits printing the data that would have been
on the specified discard segment.
•
Duplex:
Print the received fax on both sides
of papers.
•
Stapled:
If a machine is equipped with a
staper feature, you can use this option a set of
received fax to be stapled.
Redial
If recipient’s fax machine is busy or not answering,
the machine can automatically redial a remote fax
machine. You can set the number of redial
attempts and the interval between attempts.
Selecting 0 for
Redial Times
means that the
machine will not redial.
Speaker Volume
This controls the sound when a fax actually starts
to transfer data. If this option is
On
, the machine
emits sound from the beginning to the completion
of a fax. With
Comm,
the machine emits sound
only until the communication has succeeded.
There is no sound with
Off
option.
Prefix Dial
This feature allows you to set a prefix of up to five
digits. User may set this to access a
PABX(example *9) or area code number (example
02).
Junk Fax Setup
The machine does not accept faxes sent from
remote stations if their numbers are stored in the
memory as junk fax numbers. You can enter a
maximum of 10 junk fax numbers. Press
Junk
Fax Setup
, select number and
Edit
. then, enter
the last numbers (1~7 digit) of the fax number.
Ring Volume
This feature adjusts the ring volume. When you
select
Off
, the machine does not ring.
Dial Tone Volume
When you press
On Hook Dial
to send a fax, you
can hear a specific tone. To adjust the tone
volume, use this feature. Value 1 is the lowest
volume. Use left/right arrows to adjust the value.
OPTION DESCRIPTION