Rohde & Schwarz 1424.7805K02, Руководство пользователя

Страница: 82 / 530

Measurement and display configuration
R&S
®
NRX
82 User Manual 1178.5566.02 ─ 09
6.5.1 Pulse analysis result display
Shows a pulse signal in trace presentation. 2 traces are available. The measurement
results are displayed below the trace. Each measurement result is represented by a
symbol that is also used to select the result. You can choose which results you want to
display, see
Chapter 6.5.3, "Pulse Analysis dialog" , on page 83.
6.5.2 Pulse analysis settings
Access: "Measurement Settings" > "Measurement Type" > "Pulse Analysis"
Display .......................................................................................................................... 82
Pos / Scaling ................................................................................................................. 82
Autoscale ...................................................................................................................... 82
T1 / T2 ...........................................................................................................................82
Trigger ........................................................................................................................... 83
Display
See Chapter 6.1.1, "Display settings" , on page 52.
Pos / Scaling
See "Pos / Scaling" on page 77.
Autoscale
See "Autoscale" on page 77.
T1 / T2
Selects the displayed trace.
Remote command:
DISPlay[:WINDow<Window>]:TRACe:MEASurement:SELection
on page 292
Pulse analysis