Rohde & Schwarz 1424.7805K02, Руководство пользователя

Страница: 192 / 530

Remote control commands
R&S
®
NRX
192 User Manual 1178.5566.02 ─ 09
Parameter Description
<dtolerance> Mandatory. Length of a time interval during that the power level can drop
below the trigger level without being interpreted as end of the power
pulse.
Corresponds to
[SENSe<Sensor>:][POWer:]BURSt:DTOLerance
.
<end_exclude> Mandatory. Amount of time at the end of a timeslot or integration period
that is not evaluated.
Corresponds to
[SENSe<Sensor>:]TIMing:EXCLude:STOP
.
<expected_value> Optional. Value that is expected for the measurement.
<no_slots> Mandatory. Number of timeslots to be measured.
Corresponds to
[SENSe<Sensor>:][POWer:]TSLot[:AVG]:COUNt
on page 447.
<resolution> Optional. Limit up to which the measurement result probably is free of
noise.
Corresponds to
[SENSe<Sensor>:]AVERage:COUNt:AUTO:
RESolution
.
<scope_size> Mandatory. Number of test points on the time axis.
Corresponds to
[SENSe<Sensor>:]TRACe:POINts
on page 462.
<source_list> Mandatory. Primary and secondary sensor. The number for each sensor
is preceded by the character
@
. The entire expression is enclosed in
parentheses.
Example: (
@
3),(
@
2)
Sensor C is the primary sensor, and sensor B is the secondary sensor.
<start_exclude> Mandatory. Amount of time at the beginning of a timeslot or integration
period that is not evaluated.
Corresponds to
[SENSe<Sensor>:]TIMing:EXCLude:STARt
.
<statistics_size> Mandatory. Number of test points on the time axis.
Corresponds to
[SENSe<Sensor>:]STATistics:SCALe:X:POINts
on page 452.
<tslot_width> Mandatory. Width of a timeslot.
Corresponds to
[SENSe<Sensor>:][POWer:]TSLot[:AVG]:WIDTh
on page 447.
Further information
●
Chapter 13.6.6.1, "Combining commands for continuous average measurements" ,
on page 245
●
Chapter 13.6.6.2, "Combining continuous average commands with buffering" ,
on page 252
●
Chapter 13.6.8.1, "Combining commands for trace measurements" , on page 269
●
Chapter 13.6.7, "Burst average measurements" , on page 260
●
Chapter 13.6.11.1, "Combining commands for timeslot measurements" ,
on page 297
●
Chapter 13.6.12.1, "Combining commands for statistics measurements" ,
on page 309
Making measurements