RCNTEC RPCM DC 232A, Руководство пользователя

Страница: 70 / 337

4. Description of the RPCM Device
Legend:
1 — outlet number;
2 — instant current value;
3 —graph of current and active power;
4 — instant power value;
5 — "INFORMATION" values block;
6 — "COUNTERS" block with accumulated power consumption counters;;
7 — "OVERVOLTAGE PROTECTION" block;
8 — "ALARM LIMIT" block;
9 — " gear " button to open the " OUTPUT SETTINGS " overlay interface;
10 — "TURN OFF LIMIT" block.
4.5.5. Setting the Output Parameters
To set the outlet control parameters, use the pop-up window OUTPUT SETTINGS To open it, click
on the gear button of the corresponding outlet.
List of additional pop-up window settings OUTLET SETTINGS :

Name — name of the outlet;

Description — more detailed description;

don’t turn on automatically after startup — when voltage is applied to the RPCM after
a complete shutdown, this output will remain off;

turn on after start-up, s — delay at start-up; set to avoid high in-rush currents and to
start infrastructure in correct order during start-up after power blackout;

survival priority — priority with which the channels are deactivated in case of a general
overload (highest is 0, lower is 9, the higher the priority, the later the channel is discon-
nected in the event of input overload);

restart delay, s — timeout between turning off and turning on when power on outlets
restart, up to 65534 seconds max;

overcurrent alarm limit, mA — maximum permissible current; when exceeded, the sys-
tem initiates alarm condition indication that the limit was exceeded;

overcurrent alarm limit, s — delay in seconds, after which the alarm is activated;
70