4. Description of the RPCM Device
Each SNMP trap configuration record contains the following buttons:
DELETE
— to delete the SNMP trap configuration record;
DISABLE/ENABLE
— to disable/enable sending messages to this destination.
When you click
DELETE
button, a deletion confirmation window will open.
Figure 4.6.35. Window confirming deletion os SNMP Trap configuration settings.
Initially, no SNMP trap records are configured.
SNMP Traps Configuration panel contains the following buttons:
ADD TRAP
— to add new SNMP Trap configuration record;
RELOAD
— reload settings from the RPCM (if settings have been change from another con-
nection, e.g., from the command line interface or another browser session).
Click
ADD TRAP
button to open New SNMP Trap pop-up window.
Figure 4.6.36. Window for creating new SNMP trap record settings.
In the window that appears, you can specify the settings:
Destination
— IPv4 trap destination address
;
100
