4. Description of the RPCM Device
adminState enable/disable snmp
community adjust SNMP community settings
trap adjust SNMP traps settings
user adjust SNMP users settings
set time - set new time
value value
zone zone
synchronization toggle ntp synchronization
set user <username> - set parameters for username
authenticator set Authenticator for user
accessLevel set Access Level for user
disabled disables user account
enabled enables user account
password set password for user
set help - show this help
Type 'help' to get suggestions
We get obtain about using the command
set output <output number>.
set output 0 ?
Help displays:
RPCM Commands description:
set output 0-9 off - turn off output number 0-9
set output 0-9 on-turn on output number 0-9
set output 0-9 recognition - set output 0-9 recognition state
off to off
on to on
set output 0-9 overcurrent - tune overcurrent limits
alarm for alarming
turn off for turning off
set output 0-9 help - show this help
The general scheme of work with the help is indicated in Figure 4.3.3.
Figure 4.3.3. General scheme of obtaining information
4.3.5. Methods of Working with RPCM CLI
View command history
— use the
up arrow key to view previous commands
; use the
down arrow
key
to go back to the view.
Completion of partially entered commands
— to autocomplete partially entered commands,
press the
"Tab"
key, for example,
set o
pressing the
"Tab"
key results in
set output
command.
Using abbreviations for commands
— for example, the abbreviation of
sh e
is expanded into
full
sh everything
command by pressing the
"Enter"
key.
55
