4. Description of the RPCM Device
Figure 4.6.33. Window confirming the removal of the current SNMPv3 user account.
4.6.8.4. Configuring SNMP Traps
SNMP traps are configured in the
Traps tab
.
Additional information:
An SNMP trap is a special message, which is sent by the SNMP agent to the receiver (monitoring server). Such messages are
sent to alert the administrator about critical events, e.g., a short circuit, outlet turn of due to overcurrent and so on.
SNMP Trap configuration record has the following attributes:
SNMP version
— v1;
Destination Address
— IP address of the message receiver (monitoring server);
Port
— receiver’s UDP port to which traps will be sent, default is 162;
Enabled
— status of SNMP Trap configuration record —
ON
or
OFF
;
Community
— name of the community according to SNMP v1/2c authentication scheme.
Figure 4.6.34. SNMP management panel. The "Traps" tab.
99