6. Command Reference of RPCM CLI
The return is:
RPCM Commands description:
set output 0-9 overvoltage turn off limit - tune overvoltage turn off
volts 0-65534 set limit in volts
disabled disable overvoltage turn off
set output 0-9 overvoltage turn help - show this help
Type 'help' to get suggestions
Example 1
. Setting a limit of 50V.
Command:
set output 0 overvoltage turn off limit volts 240
The return is:
New overvoltage turn off limit for output 0 is 50 volts (was disabled)
Type 'help' to get suggestions
Example 2
. Disabling an overvoltage turn OFF limit.
Command:
set output 0 overvoltage turn off limit disabled
The return is:
Disable overvoltage turn off limit for output 0 (was 50 volts)
Type 'help' to get suggestions
6.9.7 Command
set output
recognition
It includes LED backlighting on the back of the panel to make it easier to find the desired outlet
in the rack.
The two available state are:
on
and
off
.
Help ask:
set output 9 recognition ?
The return is:
set output 0-9 recognition off - set output 0-9 recognition blinking off
set output 0-9 recognition on - set output 0-9 recognition blinking on
set output 0-9 recognition help - show this help
309
