4. Description of the RPCM Device
Figure 4.6.40. Time change pop-up - clock adjustment.
To set time, just click on hour value first, the interface will remember hour and switch to min-
utes, click on minutes and you’re all set.
Figure 4.6.41. Time change pop-up window — minutes adjustment.
If the desired minute that you want to set lays between values shown on the clock picture, just
click area between numbers.
To confirm the time value click
OK
button.
To cancel changes — click the
CANCEL
button.
To configure synchronization of time with time servers using
NTP
(
Network Time Protocol
), use
the
NTP
tab.
103
