6. Command Reference of RPCM CLI
readings - show all outputs instant and accumulated meter readings
show all outputs recover
turn on limits - show recover turn on limits and action delays for outputs
show all outputs startup
delays - show turn on startup delays for outputs
show all outputs turn
off limits - show turn off limits and action delays for outputs
show all outputs help - show this help
Type 'help' to get suggestions
The
show all outputs
construct without parameters displays outlet information about the out-
lets
Example of use:
show all outputs
The return is:
[Output 0]: ON <admin: ON> 0mA 0W
[Output 1]: ON <admin: ON> 0mA 0W
[Output 2]: ON <admin: ON> 0mA 0W
[Output 3]: ON <admin: ON> 0mA 0W
[Output 4]: ON <admin: ON> 0mA 0W
[Output 5]: ON <admin: ON> 0mA 0W
[Output 6]: ON <admin: ON> 0mA 0W
[Output 7]: ON <admin: ON> 0mA 0W
[Output 8]: ON <admin: ON> 0mA 0W
[Output 9]: ON <admin: ON> 0mA 0W
For the
show all outputs
, a hint is available with auto-completion. Pressing the
Tab
key twice,
will display following list of parameters:
? meter descriptions startup survival turn
6.7.5.1 Command s
how all
outputs
alarm limits
It displays the current limit values after which an alarm is sent.
Use:
show all outputs alarm limits
The return is:
Over-
Over- Over- current Over-
Over- current current Alarm current
current Alarm Alarm Limit Alarm
Instant Alarm Limit Limit Reached Fired
Milliamps Active Milliamps Seconds Times Times
[Output 0]: 0 NO 9500 30 0 0
[Output 1]: 0 NO 9501 30 0 0
[Output 2]: 0 NO 9000 30 29164 457
[Output 3]: 0 NO 9501 31 0 0
[Output 4]: 0 NO 9500 30 0 0
[Output 5]: 0 NO 9500 30 0 0
[Output 6]: 0 NO 1000 5 35 3
[Output 7]: 0 NO 9500 30 0 0
274