5. The Reference for RPCM REST API
If test is ON, following parameters are necessary:
consumptionAlarmBottomLimitMilliamps
— the bottom threshold of the current
consumption value, reaching of which triggers for alarm, mA (number 1 to 5 digits);
consumptionRestartBottomLimitMilliamps
— the bottom threshold of the current
consumption value, reaching of which triggers for restart, mA (number 1 to 5 digits);
consumptionAlarmSeconds
— stabilization delay in seconds for alarm, s (number 1 to 5
digits);
consumptionRestartSeconds
— stabilization delay in seconds for restart, s (from 1 to 5
digits);
hashRateEnabled
— hashrate monitoring (true/false).
If test is ON, following parameters are necessary:
hashRateApiIPAddress
— IP address or FQDN for API Requests
hashRateApiPort
—API port
hashRateApiUnavailabilityTimeoutSeconds
— time interval during which the API has to
respond to the request, s (number 1 to 5 digits)
hashRateAlarmBottomLimit
— the bottom threshold of the hashrate value, reaching of
which triggers an alarm, GH/s (number 1 to 7 digits)
hashRateRestartBottomLimit
— the bottom threshold of the hashrate value, reaching of
which triggers a restart, GH/s (from 1 to 5 digits);
hashRateAlarmSeconds
— stabilization delay in seconds for alarm, s (from 1 to 5 digits);
hashRateRestartSeconds
— stabilization delay in seconds for restart, s (from 1 to 5 digits);
pingEnabled
—ICMP access monitoring (ping) (true/false);
If test is ON, following parameters are necessary:
pingIPAddress
— IP address or FQDN for ICMP Requests
pingConnectTimeoutSeconds
— time interval during which the device should send the ICMP
echo reply packet in response to ICMP echo request (from 1 to 5 digits);
pingUpperLimitMilliseconds
— maximum round-trip latency value in milliseconds,
exceeding of which causes the packets to be considered los (from 1 to 5 digits);
pingAlarmPacketLossPercentage
— percentage of lost packets (top limit), which triggers an
alarm, %
pingRestartPacketLossPercentage
— percentage of lost packets (top limit), which triggers a
restart, %
pingAlarmSeconds
— мин. продолжительность для оповещения, s (from 1 to 5 digits);
pingRestartSeconds
— stabilization delay in seconds for restart, s (from 1 to 5 digits);
209