6. Command Reference of RPCM CLI
The return is:
Description for Input 1 has been updated
Type 'help' to get suggestions
Attention.
You can use command
show input
for check results.
Check configuration of input 2 after commands from examples 3 and 4.
Command:
show input 1
The return is:
[Input]: 1
[Name]: LINE-1
[Description]: Main Line
[Voltage]: 48.321
[Minimum Allowed Voltage]: 45
[Maximum Allowed Voltage]: 58
[Maximum Allowed Current Amps]: 200
[Instant Milliamps]: 0
[Instant Watts]: 0
[Accumulated KWh]: 0.382778
Example 5.
Turning on recognition for input 1.
Command:
set input 1 recognition on
The return is:
Recognition for Input 1 has been turned ON
Type 'help' to get suggestions
Example 6.
Administrative turn off input 1.
Command:
set input 1 off
The return is:
Administrative state for Input 1 has been changed to OFF
Type 'help' to get suggestions
295