6. Command Reference of RPCM CLI
Over-
Over- Over- current Over-
Over- current current Turn Off current
current Turn Off Turn Off Limit Turn Off
Instant Turn Off Limit Limit Reached Fired
Milliamps Active Milliamps Seconds Times Times
[Output 0]: 0 NO 10000 2 0 0
[Output 1]: 0 NO 10000 2 0 0
[Output 2]: 0 NO 10000 2 0 0
[Output 3]: 0 NO 10000 2 0 0
[Output 4]: 0 NO 10000 2 0 0
[Output 5]: 0 NO 10000 2 0 0
[Output 6]: 0 NO 10000 2 0 0
[Output 7]: 0 NO 10000 2 0 0
[Output 8]: 0 NO 10000 2 0 0
[Output 9]: 0 NO 10000 2 0 0
Over- Recover Over-
Over- voltage after voltage
voltage Turn Off Over- Turn Off
Turn Off Limit voltage Fired
Voltage Active Volts Seconds Times
[Output 0]: 230 OFF disabled disabled 65535
[Output 1]: 230 OFF disabled disabled 65535
[Output 2]: 230 OFF disabled disabled 65535
[Output 3]: 230 OFF disabled disabled 65535
[Output 4]: 230 OFF disabled disabled 65535
[Output 5]: 230 OFF disabled disabled 65535
[Output 6]: 230 OFF disabled disabled 65535
[Output 7]: 230 OFF disabled disabled 65535
[Output 8]: 230 OFF disabled disabled 65535
[Output 9]: 230 OFF disabled disabled 65535
Type 'help' to get suggestions
6.7.5.4 Command
show all
outputs
meter readings
It reads and displays the current meter readings on the outlets.
Use:
show all outputs meter readings
Information about the meters:
Instant Inst Accumul Inst Accumul Inst Accumul
Milliamps Watts KWh Vars KVarh VAs KVAh
[Output 0]: 0 0 0.000 0 0.006 0 0.047
[Output 1]: 0 0 0.651 0 0.089 0 0.712
[Output 2]: 0 0 241.670 0 0.040 0 241.746
[Output 3]: 0 0 0.000 0 0.108 0 0.092
[Output 4]: 0 0 0.000 0 0.045 0 0.078
[Output 5]: 0 0 0.000 0 0.088 0 0.099
[Output 6]: 0 0 65.848 0 0.075 0 65.855
[Output 7]: 0 0 0.013 0 0.117 0 0.112
[Output 8]: 0 0 0.000 0 0.009 0 0.080
[Output 9]: 0 0 0.000 0 0.098 0 0.124
276